Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| nominal_input_voltage_l_l_idevicevoltsinrating | 1357 | U32BE | 1 | V |
| output_current_rating_ideviceampsrating | 1810 | U16 | 1 | A |
| load_power_off_sloadpoweroff | 17027 | U16 | 1 | kW |
| output_kw_hours_moutputkwhour | 7002 | F32BE | 1 | kWh |
| nominal_input_frequency_inominalinputfrequency | 1669 | U16 | 1 | Hz |
| output_pf_mpfdispout | 6202 | F32BE | 1 | |
| status_sstatus | 3000 | U16 | 1 | |
| ambient_temperature_mtempambient | 12000 | F32BE | 1 | degC |
| common_battery_scommonbattery | 17016 | U16 | 1 | |
| nominal_output_voltage_l_l_idevicevoltsoutrating | 1359 | U32BE | 1 | V |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.