Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| voltage_l1_l2 | 0 | I16 | 1 | V |
| voltage_l2_l3 | 1 | I16 | 1 | |
| voltage_l3_l1 | 2 | I16 | 1 | |
| mean_voltage_phase_to_phase | 3 | I16 | 1 | |
| voltage_l1_n | 4 | I16 | 1 | |
| voltage_l2_n | 5 | I16 | 1 | |
| voltage_l3_n | 6 | I16 | 1 | |
| mean_voltage_phase_to_n | 7 | I16 | 1 | |
| voltage_thd_l1 | 8 | U16 | 0.001 | |
| voltage_thd_l2 | 9 | U16 | 0.001 | |
| voltage_thd_l3 | 10 | U16 | 0.001 | |
| frequency | 11 | U16 | 0.01 | |
| voltage_exponent | 12 | I16 | 1 | |
| current_l1 | 100 | I16 | 1 | A |
| current_l2 | 101 | I16 | 1 | |
| current_l3 | 102 | I16 | 1 | |
| mean_current | 103 | I16 | 1 | |
| current_n | 104 | I16 | 1 | |
| current_thd_l1 | 105 | U16 | 0.001 | |
| current_thd_l2 | 106 | U16 | 0.001 | |
| current_thd_l3 | 107 | U16 | 0.001 | |
| current_exponent | 108 | I16 | 1 | |
| active_power_p1 | 200 | I16 | 1 | W |
| active_power_p2 | 201 | I16 | 1 | |
| active_power_p3 | 202 | I16 | 1 | |
| active_power_total | 203 | I16 | 1 | |
| reactive_power_q1 | 204 | I16 | 1 | |
| reactive_power_q2 | 205 | I16 | 1 | |
| reactive_power_q3 | 206 | I16 | 1 | |
| reactive_power_total | 207 | I16 | 1 | |
| power_factor_l1 | 208 | I16 | 0.001 | |
| power_factor_l2 | 209 | I16 | 0.001 | |
| power_factor_l3 | 210 | I16 | 0.001 | |
| power_factor_total | 211 | I16 | 0.001 | |
| power_exponent | 212 | I16 | 1 | |
| active_energy_import_total | 300 | U32BE | 1 | Wh |
| active_energy_export_total | 302 | U32BE | 1 | |
| reactive_energy_import_total | 304 | U32BE | 1 | |
| reactive_energy_export_total | 306 | U32BE | 1 | |
| active_energy_import_active_tariff | 400 | U32BE | 1 | Wh |
| active_energy_export_active_tariff | 402 | U32BE | 1 | |
| reactive_energy_import_active_tariff | 404 | U32BE | 1 | |
| reactive_energy_export_active_tariff | 406 | U32BE | 1 | |
| active_tariff | 412 | U16 | 1 | |
| operating_hours | 500 | U32BE | 1 |
| connector | RJ45 |
| wiring notes | Supports 10 and 100 MBit/s in full and half-duplex. HP Auto-MDIX supported. |
| protocol notes | Up to 4 simultaneous connections supported (as of firmware 1.18). For firmware 1.13 and older, only 1 connection is supported. |
| firmware register | 3700 |
| identification notes | Device information can be read from Format Type 17 (Table 25). |
| power | Auxiliary voltage option available depending on model (Table 26). |
| environment | Operating temperature range -25°C...55°C |
| accuracy | Cl. B |
| doc revision | 3-349-937-03 12/3.22 |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.