Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| voltage_l1_n_v_g_uln_0 | 18999 | F32BE | 1 | V |
| apparent_current_l1_n_a_g_iln_0 | 19011 | F32BE | 1 | A |
| real_power_l1_n_w_g_pln_0 | 19019 | F32BE | 1 | kW |
| real_energy_l1_wh_g_wh_0 | 19053 | F32BE | 1 | kWh |
| measured_frequency_hz_g_freq | 19049 | F32BE | 1 | Hz |
| pfln_0 | 3892 | F32BE | 1 | |
| emax_d_status_0 | 7065 | I16 | 1 | |
| ext_temperatur | 4208 | F32BE | 1 | |
| harmonic_thd_u_l1_n_g_thd_uln_0 | 19109 | F32BE | 1 | |
| vector_sum_ini1i2i3_a_g_i_sum3 | 19017 | F32BE | 1 | |
| baud485 | 6863 | I32BE | 1 | |
| voltage_l2_n_v_g_uln_1 | 19001 | F32BE | 1 | V |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.