Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| Active SP | 0 | I16 | 1 | |
| PV | 1 | I16 | 0.1 | |
| MV | 2 | I16 | 0.1 | % |
⚠ All safety related instructions that appear in the manual must be observed to ensure personal safety and to prevent damage. — Starkest reads only; we never write a control register.
| terminals | Screw terminals accepting wire sizes from 0.5 to 1.5 mm2 (16 to 22 AWG) |
| A/B polarity | D1 (D+) on Terminal 16, D0 (D-) on Terminal 17 |
| connector | Screw terminals |
| isolation | Communication signals are electrically insulated from the rest of the device, but there is no electrical isolation between serial communication (RS485) and channel I/O5. |
| shield/ground | Terminal 18 (GND/C) for optional connection to improve performance |
| wiring notes | Tightening torque of 0.4 Nm (3.5 lb in) |
| response timeout | 100 ms |
| broadcast | supported |
| protocol notes | Time of disconnection for the controller: Maximum 2 ms after last byte. |
| identification notes | Serial number can be obtained by pressing the back key for more than 3 seconds. |
| power | 100 to 240 Vac/dc (±10 %), 50 / 60 Hz; optionally 12 to 24 Vdc / 24 Vac (-10 % / +20 %) |
| environment | Operation temperature: 5 to 50 °C, Relative humidity: 80 % max. @ 30 °C |
| accuracy | Thermocouples J, K, T, E: 0.25 % of the span ±1 °C; Thermocouples N, R, S, B: 0.25 % of the span ±3 °C; Pt100: 0.2 % of the span; 4-20 mA, 0-50 mV, 0-5 Vdc, 0-10 Vdc: 0.2 % of the span |
| certifications | CE, UKCA, UL (FILE: 300526) |
| doc revision | V2.0x M |
| firmware applicability | V2.0x |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.