Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| voltage_phase_a_to_b_volts | 1013 | U16 | 1 | V |
| current_phase_a_amps | 1002 | U16 | 1 | A |
| true_power_factor_phase_a | 1030 | U16 | 1 | PF |
| frequency_hertz | 1000 | U16 | 1 | Hz |
| time_remaining_in_demand_interval_seconds | 1751 | U16 | 1 | kW |
| temperature_inside_cm_enclosure_degrees_c | 1001 | U16 | 1 | degC |
| harmonic_factor_phase_a | 1107 | U16 | 1 | |
| update_interval_second | 999 | U16 | 1 | |
| current_phase_b_amps | 1003 | U16 | 1 | A |
| current_phase_c_amps | 1004 | U16 | 1 | A |
| current_neutral_amps | 1005 | U16 | 1 | A |
| current_ground_amps | 1006 | U16 | 1 | A |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.