Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| scale_factor_v_voltage | 4105 | I16 | 1 | V |
| scale_factor_i_current | 4104 | I16 | 1 | |
| scale_factor_w_power | 4106 | I16 | 1 | kW |
| scale_factor_e_energy | 4107 | I16 | 1 | kWh |
| service_frequency | 4124 | I16 | 1 | Hz |
| thermal_demand_interval | 4116 | I16 | 1 | kW |
| error_bitmap | 4111 | I16 | 1 | |
| serial_number | 7001 | U16 | 1 | |
| modbus_address | 7004 | I16 | 1 | |
| power_block_demand_interval | 4117 | I16 | 1 | kW |
| power_block_demand_number_of_subintervals | 4118 | I16 | 1 | kW |
| signed_real_energy_consumption | 999 | F32BE | 1 | kWh |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.