Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| monitor_1_current_phase_1_amps | 11905 | F32BE | 1 | A |
| monitor_1_power_factor_phase_1_1 | 11929 | F32BE | 1 | PF |
| monitor_1_alarm_flags | 199 | U16 | 1 | |
| monitor_1_volts_phase_1_volts | 11899 | F32BE | 1 | |
| monitor_2_alarm_flags | 200 | U16 | 1 | |
| monitor_3_alarm_flags | 201 | U16 | 1 | |
| monitor_4_alarm_flags | 202 | U16 | 1 | |
| monitor_5_alarm_flags | 203 | U16 | 1 | |
| monitor_6_alarm_flags | 204 | U16 | 1 | |
| monitor_7_alarm_flags | 205 | U16 | 1 | |
| monitor_8_alarm_flags | 206 | U16 | 1 | |
| monitor_9_alarm_flags | 207 | U16 | 1 |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.