Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| voltage_l1_n | 0 | F32BE | 1 | V |
| current_l1 | 12 | F32BE | 1 | A |
| apparent_power_l1 | 18 | F32BE | 1 | kW |
| line_frequency | 54 | F32BE | 1 | Hz |
| sliding_window_demand_active_pow_er_l1 | 324 | F32BE | 1 | kW |
| pmd_diagnostics_and_status | 204 | U16 | 1 | |
| maximum_3_phase_average_volt_age_l_n | 130 | F32BE | 1 | |
| voltage_l2_n | 2 | F32BE | 1 | V |
| voltage_l3_n | 4 | F32BE | 1 | V |
| voltage_l1_l2 | 6 | F32BE | 1 | V |
| voltage_l2_l3 | 8 | F32BE | 1 | V |
| voltage_l3_l1 | 10 | F32BE | 1 | V |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.