Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| ph_n_voltage_v1_v | 18443 | U32BE | 1 | V |
| current_i1_ma | 18457 | U32BE | 1 | |
| total_active_power_w | 18475 | I32BE | 1 | kW |
| total_positive_active_energy_eap_kwh | 19840 | U32BE | 1 | kWh |
| frequency_mhz | 18441 | U32BE | 1 | Hz |
| load_status | 18431 | U16 | 1 | |
| modbus_table_version | 50005 | U16 | 1 | |
| ph_n_voltage_v2_v | 18445 | U32BE | 1 | V |
| ph_n_voltage_v3_v | 18447 | U32BE | 1 | V |
| ph_ph_voltage_u12_v | 18451 | U32BE | 1 | V |
| ph_ph_voltage_u23_v | 18453 | U32BE | 1 | V |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.