Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| i_ac_voltageab | 40076 | U16 | 1 | V |
| i_ac_current | 40071 | U16 | 1 | |
| i_ac_power | 40083 | I16 | 1 | kW |
| i_ac_energy_wh | 40093 | U32BE | 1 | kWh |
| i_ac_frequency | 40085 | U16 | 1 | Hz |
| i_ac_pf1 | 40091 | I16 | 1 | |
| i_status | 40107 | U16 | 1 | |
| i_temp_sink | 40103 | I16 | 1 | |
| c_sunspec_id | 40000 | U32BE | 1 | |
| m_exported | 40226 | U32BE | 1 | |
| i_ac_currenta | 40072 | U16 | 1 |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.