Register map(s) for this device, with a note of how far each has been checked. Addresses are 0-based, as on the wire. Scale and byte order are confirmed only at the hardware-verified rung.
Round-trips through a real Modbus stack with no overlapping addresses and a word-order-sensitive codec — the map is internally coherent and wire-decodable. Does NOT prove byte-order or scaling match a real device: the emulator is seeded from the map's own types, so a uniformly wrong byte-order still round-trips. Only hardware-verified confirms byte-order/scale on the wire.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| Watchdog time read/write | 4096 | U16 | 1 | |
| Watchdog coding mask 1...16 | 4097 | U16 | 1 | |
| Watchdog coding mask 17...32 | 4098 | U16 | 1 | |
| Watchdog trigger | 4099 | U16 | 1 | |
| Minimum trigger time | 4100 | U16 | 1 | |
| Watchdog stop | 4101 | U16 | 1 | |
| Watchdog status | 4102 | U16 | 1 | |
| Restart watchdog | 4103 | U16 | 1 | |
| Stop watchdog | 4104 | U16 | 1 | |
| Modbus and HTTP close at watchdog time-out | 4105 | U16 | 1 | |
| Watchdog configuration | 4106 | U16 | 1 | |
| Save watchdog parameter | 4107 | U16 | 1 | |
| LED error code | 4128 | U16 | 1 | |
| LED error argument | 4129 | U16 | 1 | |
| Number of analog output data in the process image (in bits) | 4130 | U16 | 1 | |
| Number of analog input data in the process image (in bits) | 4131 | U16 | 1 | |
| Number of digital output data in the process image (in bits) | 4132 | U16 | 1 | |
| Number of digital input data in the process image (in bits) | 4133 | U16 | 1 | |
| Modbus TCP statistics | 4137 | U16 | 1 | |
| Number of TCP connections | 4138 | U16 | 1 | |
| KBUS Reset | 4139 | U16 | 1 | |
| Configuration MODBUS/TCP time-out | 4144 | U16 | 1 | ms |
| Read out the MAC-ID of the coupler/controller | 4145 | U16 | 1 | |
| Modbus Response Delay (ms) | 4151 | U16 | 1 | ms |
| Modbus TOS | 4152 | U16 | 1 | |
| Diagnosis of the connected I/O modules | 4176 | U16 | 1 | |
| Constant 0x0000 | 8192 | U16 | 1 | |
| Constant 0xFFFF | 8193 | U16 | 1 | |
| Constant 0x1234 | 8194 | U16 | 1 | |
| Constant 0xAAAA | 8195 | U16 | 1 | |
| Constant 0x5555 | 8196 | U16 | 1 | |
| Constant 0x7FFF | 8197 | U16 | 1 | |
| Constant 0x8000 | 8198 | U16 | 1 | |
| Constant 0x3FFF | 8199 | U16 | 1 | |
| Constant 0x4000 | 8200 | U16 | 1 | |
| Firmware version | 8208 | U16 | 1 | |
| Series code | 8209 | U16 | 1 | |
| Coupler/controller code | 8210 | U16 | 1 | |
| Firmware version major revision | 8211 | U16 | 1 | |
| Firmware version minor revision | 8212 | U16 | 1 | |
| Short description controller | 8224 | U16 | 1 | |
| Compile time of the firmware | 8225 | U16 | 1 | |
| Compile date of the firmware | 8226 | U16 | 1 | |
| Indication of the firmware loader | 8227 | U16 | 1 | |
| Description of the connected I/O modules (module 0...64) | 8240 | U16 | 1 | |
| Description of the connected I/O modules (module 65...128) | 8241 | U16 | 1 | |
| Description of the connected I/O modules (module 129...192) | 8242 | U16 | 1 | |
| Description of the connected I/O modules (module 193...255) | 8243 | U16 | 1 | |
| Process image settings table 0 register 3 | 8245 | U16 | 1 | |
| Fieldbus coupler/controller diagnostics | 8246 | U16 | 1 | |
| Software reset | 8256 | U16 | 1 | |
| Factory settings | 8259 | U16 | 1 |
⚠ WARNING – DO NOT REMOVE OR REPLACE FUSED WHILE ENERGIZED! WARNING – DO NOT DISCONNECT WHILE ENERGIZED! WARNING – ONLY DISCONNECT IN A NON-HAZARDOUS AREA! — Starkest reads only; we never write a control register.
| terminals | CAGE CLAMP |
| connector | 2 x RJ-45 |
| isolation | 500 V system/supply |
| max registers/read | 125 |
| response timeout | 60000 ms |
| model register | 0x2012 |
| firmware register | 0x2010 |
| power | 24 V DC (-25% ... +30%) |
| environment | Surrounding air temperature, operation 0 °C ... 55 °C, storage -25 °C ... +85 °C, Relative humidity Max. 5 % ... 95 % without condensation, IP20 |
| certifications | CE, UL61010-2-201, MSIP-REM-W43-PFC750, UL 121201 Cl I Div 2, ATEX, IECEx, ABS, DNV GL, PRS |
| doc revision | Version 1.0.2 |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Device not here? Upload its manual and get a checked map back. It's free.
Want it confirmed against your own device? Order hardware verification. If it doesn't check out, you don't pay.
Building on a lot of devices? License the library — machine-readable maps, the firmware matrix, and API access.