Register map(s) for this device, each at the trust rung it earned. Addresses are 0-based as on the wire. Word order and scaling are confirmed at the hardware-verified rung and at no rung below it.
Read + decoded cleanly over a real network vs an independent third-party Modbus test server (transport and framing; reads are remapped into the server's register window, so the map's own addresses are NOT exercised). Does NOT prove word order/scaling against the actual device.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| v1_voltage | 13952 | U32LE | 0.1 | |
| v2_voltage | 13954 | U32LE | 0.1 | |
| v3_voltage | 13956 | U32LE | 0.1 | |
| i1_current | 13958 | U32LE | 0.01 | |
| i2_current | 13960 | U32LE | 0.01 | |
| i3_current | 13962 | U32LE | 0.01 | |
| kw_l1 | 13964 | U32LE | 0.001 | |
| kw_l2 | 13966 | U32LE | 0.001 | |
| kw_l3 | 13968 | U32LE | 0.001 | |
| kvar_l1 | 13970 | U32LE | 0.001 | |
| kvar_l2 | 13972 | U32LE | 0.001 | |
| kvar_l3 | 13974 | U32LE | 0.001 | |
| kva_l1 | 13976 | U32LE | 0.001 | |
| kva_l2 | 13978 | U32LE | 0.001 | |
| kva_l3 | 13980 | U32LE | 0.001 | |
| power_factor_l1 | 13982 | U32LE | 0.001 | |
| power_factor_l2 | 13984 | U32LE | 0.001 | |
| power_factor_l3 | 13986 | U32LE | 0.001 | |
| total_kw | 14336 | U32LE | 0.001 | |
| total_kvar | 14338 | U32LE | 0.001 | |
| total_kva | 14340 | U32LE | 0.001 | |
| total_pf | 14342 | U32LE | 0.001 | |
| frequency | 14466 | U32LE | 0.01 | |
| kwh_import | 14720 | U32LE | 0.1 | |
| kwh_export | 14722 | U32LE | 0.1 | |
| kvarh_import | 14728 | U32LE | 0.1 | |
| kvarh_export | 14730 | U32LE | 0.1 | |
| kvah_total | 14736 | U32LE | 0.1 |
| wiring notes | Communication interface options: RS-232, RS-422, RS-485, Infrared, Dial-Up Modem, RF Modem, Ethernet, GSM/GPRS |
| broadcast | not supported |
| model register | 46084 |
| serial register | 46080 |
| firmware register | 46100 |
| doc revision | BG0548 Rev. A1 |
⚠ disputed: frequency @ 14466 — disputed by E-Mon Multi-Mon MODBUS Reference Guide BG0548 Section 3.1, which shows the 1-Second Auxiliary Values block starting at 14464, where offset +2,3 (14466-14467) is 'In (neutral) Current' and offset +4,5 (14468-14469) is 'Frequency'
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
If your device isn't here, upload its register map. Generation is free, and the connector keeps the rung it earns under testing.
To prove a connector against your own device, order hardware verification. If it doesn't verify, you don't pay.
Platform builders can license the verified library: machine-readable maps, the firmware matrix, API access.