Register map(s) for this device, each at the trust rung it earned. Addresses are 0-based as on the wire; word order and scaling are only confirmed at the hardware-verified rung.
Read + decoded cleanly over a real network vs an independent third-party Modbus test server (transport and framing; reads are remapped into the server's register window, so the map's own addresses are NOT exercised). Does NOT prove word order/scaling against the actual device.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| serial_number | 129 | U32BE | 1 | |
| meter_operation_timer | 2003 | U32BE | 1 | s |
| number_of_phases | 2013 | U16 | 1 | |
| number_of_wires | 2014 | U16 | 1 | |
| power_system | 2015 | U16 | 1 | |
| i1_phase_1_current | 2999 | F32BE | 1 | A |
| i2_phase_2_current | 3001 | F32BE | 1 | A |
| i3_phase_3_current | 3003 | F32BE | 1 | A |
| current_avg | 3009 | F32BE | 1 | A |
| voltage_l1_l2 | 3019 | F32BE | 1 | V |
| voltage_l2_l3 | 3021 | F32BE | 1 | V |
| voltage_l3_l1 | 3023 | F32BE | 1 | V |
| voltage_ll_avg | 3025 | F32BE | 1 | V |
| voltage_l1_n | 3027 | F32BE | 1 | V |
| voltage_l2_n | 3029 | F32BE | 1 | V |
| voltage_l3_n | 3031 | F32BE | 1 | V |
| voltage_ln_avg | 3035 | F32BE | 1 | V |
| active_power_phase_1 | 3053 | F32BE | 1 | kW |
| active_power_phase_2 | 3055 | F32BE | 1 | kW |
| active_power_phase_3 | 3057 | F32BE | 1 | kW |
| total_active_power | 3059 | F32BE | 1 | kW |
| total_reactive_power | 3067 | F32BE | 1 | kVAR |
| total_apparent_power | 3075 | F32BE | 1 | kVA |
| total_power_factor | 3083 | F32BE | 1 | |
| frequency | 3109 | F32BE | 1 | Hz |
| total_active_energy_import | 45099 | F32BE | 1 | kWh |
| total_active_energy_export | 45101 | F32BE | 1 | kWh |
| total_reactive_energy_import | 45103 | F32BE | 1 | kVARh |
| total_reactive_energy_export | 45105 | F32BE | 1 | kVARh |
| partial_active_energy_import | 45107 | F32BE | 1 | kWh |
| partial_reactive_energy_import | 45109 | F32BE | 1 | kVARh |
| active_energy_import_phase_1 | 45111 | F32BE | 1 | kWh |
| active_energy_import_phase_2 | 45113 | F32BE | 1 | kWh |
| active_energy_import_phase_3 | 45115 | F32BE | 1 | kWh |
⚠ Do not use this device for critical control or protection of persons, animals, property or equipment. — Starkest reads only; we never write a control register.
| terminals | 0V, D0/-, D1/+ |
| isolation | 4.0 kV rms |
| shield/ground | shield |
| model register | 49 |
| serial register | 129 |
| firmware register | 1636 |
| FC 43 device ID | supported |
| environment | Operating temperature: -25 to 70 °C (-13 to 158 °F), Storage temperature: -40 to 85 °C (-40 to 185 °F), Relative humidity: 5% to 95% RH non-condensing, Altitude: < 3000 m |
| accuracy | Active energy: Class 1 conforming to BS/ EN/ IEC 62053-21, Class B conforming to BS/ EN 50470-3; Reactive energy: MID compliance, Class 2 conforming to BS/ EN/ IEC 62053-23 |
| certifications | IEC 62052-31: 2015, IEC 62052-11: 2020, IEC 62053-21: 2020, IEC 62053-22: 2020, IEC 62053-23: 2020, IEC 61557-12: 2018/ AMD1: 2021 |
| doc revision | DOCA0005EN-15, 07/2025 |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Have a device that isn't here? Upload its register map — generation is free, and the connector earns its rung by being proven, not claimed.
Need it proven on your own device? Hardware verification — if it doesn't verify, you don't pay.
Building a platform? License the verified library — machine-readable maps, firmware matrix, API access.