Register map(s) for this device, each at the trust rung it earned. Addresses are 0-based as on the wire; word order and scaling are only confirmed at the hardware-verified rung.
Read + decoded cleanly over a real network vs an independent third-party Modbus test server (transport and framing; reads are remapped into the server's register window, so the map's own addresses are NOT exercised). Does NOT prove word order/scaling against the actual device.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| real_energy_total | 1000 | F32BE | 1 | |
| apparent_energy_total | 1002 | F32BE | 1 | |
| reactive_energy_total | 1004 | F32BE | 1 | |
| real_power_total | 1006 | F32BE | 1 | |
| apparent_power_total | 1008 | F32BE | 1 | |
| reactive_power_total | 1010 | F32BE | 1 | |
| power_factor_total | 1012 | F32BE | 1 | |
| voltage_ll_3p_average | 1014 | F32BE | 1 | |
| voltage_ln_3p_average | 1016 | F32BE | 1 | |
| current_3p_average | 1018 | F32BE | 1 | |
| frequency | 1020 | F32BE | 1 | |
| current_a | 1034 | F32BE | 1 | |
| current_b | 1036 | F32BE | 1 | |
| current_c | 1038 | F32BE | 1 | |
| current_n | 1040 | F32BE | 1 | |
| voltage_ab | 1054 | F32BE | 1 | |
| voltage_bc | 1056 | F32BE | 1 | |
| voltage_ca | 1058 | F32BE | 1 | |
| voltage_an | 1060 | F32BE | 1 | |
| voltage_bn | 1062 | F32BE | 1 | |
| voltage_cn | 1064 | F32BE | 1 | |
| real_power_a | 1066 | F32BE | 1 | |
| real_power_b | 1068 | F32BE | 1 | |
| real_power_c | 1070 | F32BE | 1 | |
| apparent_power_a | 1072 | F32BE | 1 | |
| apparent_power_b | 1074 | F32BE | 1 | |
| apparent_power_c | 1076 | F32BE | 1 | |
| reactive_power_a | 1078 | F32BE | 1 | |
| reactive_power_b | 1080 | F32BE | 1 | |
| reactive_power_c | 1082 | F32BE | 1 | |
| current_a_thd | 1084 | F32BE | 1 | |
| current_b_thd | 1086 | F32BE | 1 | |
| current_c_thd | 1088 | F32BE | 1 | |
| voltage_an_thd | 1092 | F32BE | 1 | |
| voltage_bn_thd | 1094 | F32BE | 1 | |
| voltage_cn_thd | 1096 | F32BE | 1 | |
| voltage_ab_thd | 1098 | F32BE | 1 | |
| voltage_bc_thd | 1100 | F32BE | 1 | |
| voltage_ca_thd | 1102 | F32BE | 1 | |
| real_power_total_demand_present | 1022 | F32BE | 1 | |
| apparent_power_total_demand_present | 1024 | F32BE | 1 | |
| reactive_power_total_demand_present | 1026 | F32BE | 1 | |
| real_power_total_demand_peak | 1028 | F32BE | 1 | |
| apparent_power_total_demand_peak | 1030 | F32BE | 1 | |
| reactive_power_total_demand_peak | 1032 | F32BE | 1 | |
| current_a_demand_present | 1042 | F32BE | 1 | |
| current_b_demand_present | 1044 | F32BE | 1 | |
| current_c_demand_present | 1046 | F32BE | 1 | |
| current_a_demand_peak | 1048 | F32BE | 1 | |
| current_b_demand_peak | 1050 | F32BE | 1 | |
| current_c_demand_peak | 1052 | F32BE | 1 | |
| power_factor_total_int | 4009 | I16 | 0.0001 | |
| frequency_int | 4013 | I16 | 0.01 | |
| current_a_thd_int | 4045 | I16 | 0.1 | |
| current_b_thd_int | 4046 | I16 | 0.1 | |
| current_c_thd_int | 4047 | I16 | 0.1 | |
| power_factor_total_signed_int | 4048 | I16 | 0.0001 | |
| voltage_an_thd_int | 4049 | I16 | 0.1 | |
| voltage_bn_thd_int | 4050 | I16 | 0.1 | |
| voltage_cn_thd_int | 4051 | I16 | 0.1 | |
| voltage_ab_thd_int | 4052 | I16 | 0.1 | |
| voltage_bc_thd_int | 4053 | I16 | 0.1 | |
| voltage_ca_thd_int | 4054 | I16 | 0.1 |
| terminals | Control power supply connector, Voltage inputs, Current inputs, RS485 port (COM1), I/O |
| A/B polarity | Proper polarity must be observed for CTs and PTs |
| termination | One (1) RS485 Terminator (MCT2W) included |
| connector | RS485 port (COM1) |
| isolation | Digital Output: 3.0 kV rms isolation; Status Digital Inputs: 2.5 kV rms isolation |
| identification notes | Supports Modbus command 0x11 (Report ID) returning PM710 Power Meter, and 0x2B (Read Device Identification) returning manufacturer, model, and firmware version. |
| FC 43 device ID | supported |
| power | AC: 100 to 415 ±10% V AC, 5 VA, 50 to 60 Hz; DC: 125 to 250 ±20% V DC, 3W |
| environment | Operating temperature: Meter -5 °C to +60 °C, Display -10 °C to +55 °C; Storage temperature: -40 °C to +85 °C; Humidity: 5 to 95% RH at 50 °C (non-condensing); Altitude: 3000 m; Pollution degree: 2 |
| accuracy | Current: 0.4% (1A to 6A); Voltage: 0.3% (50V to 277V); Power Factor: 0.5% (1A to 6A); Power: 0.5%; Frequency: ±0.02% (45 to 65 Hz); Real Energy: IEC 62053-22 Class 0.5S; Reactive Energy: IEC 62053-23 Class 2 |
| certifications | CE, as per IEC 61010-1, UL508 |
| doc revision | 63230-507-201A1, 03/2007 |
| firmware applicability | 3.000 and later |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
Have a device that isn't here? Upload its register map — generation is free, and the connector earns its rung by being proven, not claimed.
Need it proven on your own device? Hardware verification — if it doesn't verify, you don't pay.
Building a platform? License the verified library — machine-readable maps, firmware matrix, API access.