Setra Power Patrol power meter

Register map(s) for this device, each at the trust rung it earned. Addresses are 0-based as on the wire. Word order and scaling are confirmed at the hardware-verified rung and at no rung below it.

interop-verified

Read + decoded cleanly over a real network vs an independent third-party Modbus test server (transport and framing; reads are remapped into the server's register window, so the map's own addresses are NOT exercised). Does NOT prove word order/scaling against the actual device.

point	address (0-based)	type	scale	unit
vin1_l1_n	104	F32BE	1	V
vin1_l2_n	106	F32BE	1	V
vin1_l3_n	108	F32BE	1	V
vin1_l1_l2	110	F32BE	1	V
vin1_l2_l3	112	F32BE	1	V
vin1_l3_l1	114	F32BE	1	V
vin1_freq	128	F32BE	1	hertz
vin2_l1_n	152	F32BE	1	V
vin2_l2_n	154	F32BE	1	V
vin2_l3_n	156	F32BE	1	V
vin2_l1_l2	158	F32BE	1	V
vin2_l2_l3	160	F32BE	1	V
vin2_l3_l1	162	F32BE	1	V
vin2_freq	176	F32BE	1	hertz
total_kwh	324	F32BE	1	kWh
total_kwh_plus	326	F32BE	1	kWh
total_kwh_minus	328	F32BE	1	kWh
total_kvarh	330	F32BE	1	kvarh
total_amperage	352	F32BE	1	A
total_kw	354	F32BE	1	kW
total_kvar	356	F32BE	1	kvar
total_kva	358	F32BE	1	kVA
total_apf	360	F32BE	1	power-factor
total_dpf	362	F32BE	1	power-factor
phase_l1_kwh	404	F32BE	1	kWh
phase_l1_amps	430	F32BE	1	A
phase_l1_kw	432	F32BE	1	kW
phase_l1_kvar	434	F32BE	1	kvar
phase_l1_kva	436	F32BE	1	kVA
phase_l1_apf	438	F32BE	1	power-factor
phase_l2_kwh	464	F32BE	1	kWh
phase_l2_amps	490	F32BE	1	A
phase_l2_kw	492	F32BE	1	kW
phase_l2_kvar	494	F32BE	1	kvar
phase_l2_kva	496	F32BE	1	kVA
phase_l2_apf	498	F32BE	1	power-factor
phase_l3_kwh	524	F32BE	1	kWh
phase_l3_amps	550	F32BE	1	A
phase_l3_kw	552	F32BE	1	kW
phase_l3_kvar	554	F32BE	1	kvar
phase_l3_kva	556	F32BE	1	kVA
phase_l3_apf	558	F32BE	1	power-factor

link settings as documented (unverified): RTU/TCP; Data Format: Big-Endian (high byte first, or most significant byte first)

bench facts as documented (unverified)

model register	30042
serial register	30050
firmware register	30058
doc revision	SS-SPM-MODBUS_G

field reports — community-sourced, unverified (checked 2026-06-11)

confirmed: comms framing: RTU, TCP — confirmed by Setra Power Patrol product documentation and BACnet PICS [1.3.9]
confirmed: Data Format: Big-Endian (high byte first, or most significant byte first) — confirmed by Setra Power Meter Modbus Register Master List (SS-SPM-MODBUS_G)
confirmed: doc_revision: SS-SPM-MODBUS_G — confirmed by Setra Power Meter Modbus Register Master List (SS-SPM-MODBUS_G)
confirmed: identification registers (firmware: 30058, model: 30042, serial: 30050) — confirmed by Setra Power Meter Modbus Register Master List (SS-SPM-MODBUS_G)
confirmed: vin1 voltage and frequency registers (vin1_l1_n @ 104, vin1_l2_n @ 106, vin1_l3_n @ 108, vin1_l1_l2 @ 110, vin1_l2_l3 @ 112, vin1_l3_l1 @ 114, vin1_freq @ 128) — confirmed by Setra Power Meter Modbus Register Master List (SS-SPM-MODBUS_G)
confirmed: vin2 voltage and frequency registers (vin2_l1_n @ 152, vin2_l2_n @ 154, vin2_l3_n @ 156, vin2_l1_l2 @ 158, vin2_l2_l3 @ 160, vin2_l3_l1 @ 162, vin2_freq @ 176) — confirmed by Setra Power Meter Modbus Register Master List (SS-SPM-MODBUS_G)
confirmed: total energy and power registers (total_kwh @ 324, total_kwh_plus @ 326, total_kwh_minus @ 328, total_kvarh @ 330, total_amperage @ 352, total_kw @ 354, total_kvar @ 356, total_kva @ 358, total_apf @ 360, total_dpf @ 362) — confirmed by Setra Power Meter Modbus Register Master List (SS-SPM-MODBUS_G)
confirmed: phase L1 registers (phase_l1_kwh @ 404, phase_l1_amps @ 430, phase_l1_kw @ 432, phase_l1_kvar @ 434, phase_l1_kva @ 436, phase_l1_apf @ 438) — confirmed by Setra Power Meter Modbus Register Master List (SS-SPM-MODBUS_G)

The trust ladder

Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.

generated — A prompt produced it. Unproven — anyone can regenerate this.
structure-verified — Decode path is structurally sound (addresses, widths, finite values). Does NOT prove word order or scaling.
interop-verified — Read + decoded cleanly over a real network vs an independent third-party Modbus test server (transport and framing; reads are remapped into the server's register window, so the map's own addresses are NOT exercised). Does NOT prove word order/scaling against the actual device.
simulator-verified — Decoded correctly against a protocol emulator seeded with known-true values — catches word-order/scaling errors vs the emulator, not the physical device.
hardware-verified x1 — Matched a real device with operator-attested readings as ground truth — the only rung that confirms word order + scaling on the wire.

If your device isn't here, upload its register map. Generation is free, and the connector keeps the rung it earns under testing.

To prove a connector against your own device, order hardware verification. If it doesn't verify, you don't pay.

Platform builders can license the verified library: machine-readable maps, the firmware matrix, API access.