Register map(s) for this device, each at the trust rung it earned. Addresses are 0-based as on the wire. Word order and scaling are confirmed at the hardware-verified rung and at no rung below it.
Read + decoded cleanly over a real network vs an independent third-party Modbus test server (transport and framing; reads are remapped into the server's register window, so the map's own addresses are NOT exercised). Does NOT prove word order/scaling against the actual device.
| point | address (0-based) | type | scale | unit |
|---|---|---|---|---|
| sa_air_flow | 3 | U16 | 1 | |
| ea_air_flow | 5 | U16 | 1 | |
| sa_duct_pressure | 7 | U16 | 0.1 | |
| ea_duct_pressure | 9 | U16 | 0.1 | |
| sa_ahu_filter_pressure_level | 26 | U16 | 0.1 | |
| ea_ahu_filter_pressure_level | 28 | U16 | 0.1 | |
| sa_fan_level | 36 | U16 | 0.01 | |
| ea_fan_level | 37 | U16 | 0.01 | |
| sa_fan_speed | 38 | U16 | 1 | |
| ea_fan_speed | 39 | U16 | 1 | |
| sa_voltage | 40 | U16 | 1 | |
| ea_voltage | 41 | U16 | 1 | |
| sa_fan_current | 42 | U16 | 0.001 | |
| ea_fan_current | 43 | U16 | 0.001 | |
| sa_fan_power | 44 | U16 | 0.001 | |
| ea_fan_power | 45 | U16 | 0.001 | |
| sa_fan_kwh | 46 | U16 | 1 | |
| ea_fan_kwh | 47 | U16 | 1 | |
| sa_temperature | 63 | I16 | 0.01 | °C |
| ea_temperature | 65 | I16 | 0.01 | °C |
| outdoor_temperature | 72 | I16 | 0.01 | °C |
| heat_exchanger_regulator_level | 90 | U16 | 0.01 | % |
| reheat_regulator_level | 93 | U16 | 0.01 | % |
| cool_regulator_level | 100 | U16 | 0.01 | % |
| rhx_operation_level | 104 | U16 | 0.01 | % |
| operation_level | 591 | U16 | 1 | |
| sa_low_speed_air_flow_set_point | 2 | U16 | 1 | |
| ea_low_speed_air_flow_set_point | 3 | U16 | 1 | |
| sa_high_speed_air_flow_set_point | 4 | U16 | 1 | |
| ea_high_speed_air_flow_set_point | 5 | U16 | 1 | |
| sa_low_speed_pressure_set_point | 18 | U16 | 0.1 | |
| ea_low_speed_pressure_set_point | 19 | U16 | 0.1 | |
| sa_high_speed_pressure_set_point | 20 | U16 | 0.1 | |
| ea_high_speed_pressure_set_point | 21 | U16 | 0.1 | |
| sa_temperature_set_point | 131 | I16 | 0.01 | % |
| ea_room_temperature_set_point | 134 | I16 | 0.01 | mBar |
| firmware applicability | Applicable to program version 1.09 and newer versions |
Each rung states what it proved and what it did not. Gray until proven; green is earned by hardware only.
If your device isn't here, upload its register map. Generation is free, and the connector keeps the rung it earns under testing.
To prove a connector against your own device, order hardware verification. If it doesn't verify, you don't pay.
Platform builders can license the verified library: machine-readable maps, the firmware matrix, API access.